Your hi-fi system is like a jigsaw puzzle in which each component plays an important role in forming the final picture. Attention to detail is important to ensure smooth, unobstructed listening of the signal from the source to the speakers. The jumpers Dedalus Bridge are designed to offer the best possible replacement for the stock jumpers of your speakers.
The importance of jumpers bridge.
Often high-end loudspeakers are equipped with 4 terminals for connection, because they offer the possibility of Bi-Wiring or Bi-Amping. If not used in such configurations, the “High Level” terminals should be connected to the “Low Level” terminals. All loudspeaker manufacturers supply jumpers, which are usually a poor quality brass plate. This situation has enormous disadvantages in reproduction, because the signal Speaker is not transmitted with the same purity as from the amplifier, when using quality Speaker Cables. To remedy this situation and achieve maximum sound performance, simply replace the supplied jumpers with Ricable Dedalus Bridge . This will put your system in the best possible playing condition.
Dedalus Bridge is produced with either the Dedalus Speaker MKII (DPB/DPF) or the Dedalus Speaker Elite (EPB/EPF) conductors in 16 cm lengths and is terminated with spades/spades or spades/banane. The Ricable Dedalus Bridge jumpers are designed to work best with our Dedalus and Magnus series cables, but are also suitable for lesser Speaker cables.
Quality Dedalus for your loudspeakers.
- MARC conductor70% compared to OFC: 6.4 mm² conductors made of copper 7N MARC (Multicore Annealed Ricable Conductor) with 0.1 mm strands with a smoother and more compact surface allow 70% better audio transmission than OFC copper.
- COMPROMISE-FREE CONSTRUCTION: Twisted Geometry with 750 strands (DPF/DPB) and Hexaphonic with 784 strands (EPF/EPB) per polymer-insulated conductor that drastically improves the audio signal.
- MADE BY HAND IN ITALY by RICABLE: Every step of the production process is carried out entirely by hand and the checks on every single piece are maniacal, with the use of new tools and testing procedures, but above all with the help of meticulous human control. From the union of Technology and Italian Craftsmanship, the cables Dedalus Made in Italy are born.
Specifications:
- Capacity: EPF/EPB: 45 pF/m
- Resistance: EPF/EPB: 3.4 Ω/km
- RMS watts supported: EPF/EPB: 700W RMS Max
- Conductor Section: 6.4 mm²
- Structure Conductors: EPF/EPB: 784 triple twisted wires in 7 concentric braids
- Strand diameter: 0.10 mm
- Material Conductors: MARC Pure Copper 7N 99.99999%.
- Geometry: EPF/EPB: Hexaphonic
- Dielectric Insulator: EPF/EPB: Dual Technopolymer R-TEC
- Connector material: Copper (model with Copper/Tellurium bananas)
- Contact: Hand-welded with special Eutectic Alloy Sn/Ag/Cu
Reviews
There are no reviews yet.