The Magnus Jack series is developed on the basis of Magnus Signal to provide professional interconnects and headphone cables. To enable better usability, we have improved the flexibility and increased the mechanical strength of these products, while keeping the acoustic performance almost unchanged.
Used to connect high level equipment, you will be surprised by the sound performance characterised by high transparency and naturalness. The sound is particularly neutral, in keeping with the Ricable tradition, and the control of the entire frequency range is excellent, resulting in a balanced and well characterised listening experience.
- PROJECT: Magnus Jack represents the first step towards perfect signal transmission. The technological solutions used are derived from the Dedalus series and guarantee an exclusive and durable support for your equipment.
- MARC CONDUCTOR +70% Compared with OFC: 0.35 mm2 Copper 7N MARC (Multicore Annealed Ricable Conductor) conductors with strands 0.08 mm smoother and more compact surface allow +70% better audio transmission than OFC Copper.
- COPPER/TELLURIUM CONNECTORS 20% BETTER THAN BRASS: 6.3 mm Jack connectors made of Copper-Tellurium alloy plated with 24K Gold by electrolysis technique. With these connectors there is an improvement in electrical parameters of over 20% compared to common brass connectors.
- PROTECTED FROM INTERFERENCE: Twisted geometry, supported by Double shielding with OFC copper spiral and Aluminium/Mylar foil, covers all audio frequencies from EMI/RFI interference. Insulation and conductor cord construction with crank pin detorsion to eliminate any stress on the conductors.
- EASY INSTALLATION: Thanks to the exceptional raw materials used, Magnus Signal Jack has above-normal flexibility, allowing you to use it comfortably even in awkward situations.
Specifications:
- Capacity: 50 pF/m
- Resistance: 68 Ω/km
- External diameter: Ø 8 , 9 mm
- Conductor Section: 2 x 0 , 35 mm²
- Structure Conductors: Twisted Pair
- Diameter strand: 0 , 08 mm
- Material Conductors: MARC Pure Copper 7N 99 , 99999%
- Geometry: Twisted conductors
- Dielectric Insulator: Polyethylene
- Internal shielding: Mylar and Aluminium
- External shielding: OFC Copper Spiral
- External Protection: High density sheathing with Polyethylene/Nylon overbraid
- Connector material: Alloy Copper Tellurium
- Contact: Hand-welded with special Eutectic Alloy Sn/Ag/Cu
Reviews
There are no reviews yet.